EN19 – BRIGHT BAR Grade Introduction:

EN19 steel bright round bar also known as AMERICAN SAE 4140 round bar. EN 19 Bright  Round Bar is a 1% chromium – molybdenum medium hardenability general purpose high tensile steel – generally supplied hardened and tempered in the tensile range of 850 – 1000 Mpa (condition T). All our 4140 Alloy Steel Bar supplied is Ultrasound and MPI inspected. EN19 bright bar is a high quality alloy steel with tensile strength. It is a high quality medium carbon. EN19 black bar is one steel grade in BS 970-1955 standard, which is specification for wrought steels for mechanical and allied engineering purpose. With a combination of good ductility and shock resistance, EN19 bar and en 19 flat bar is suitable for applications with very high loading such as engine gear boxes. EN19 square bar is a popular material in the automotive sector it is possible to machine the material extremely accurately. EN19 hollow bar material is also in demand by Oil & Gas industry. EN19 steel bar is a prime choice because of its high strength. The EN19 rod equivalent grades are AISI 4140 Rod, DIN 1.7225/42crmo4 Bar.

 

EN19 steel bright round bar is an engineering alloy steel containing chromium and molybdenum. EN19 welding rod comes under the class of low alloy steel. EN19 round bars have high fatigue strength, abrasion and impact resistance, toughness, and torsional strength. EN19 black bars can be heat treated in a number of ways to give it a combination of properties. Oil Quenched & Tempered Hardness is 28-34 HRc.  EN19 bright bar Annealing delivery hardness is less than 250HB. En19 round bar has high tensile strength of 850- 1000 Mpa. 

 

EN19 – BRIGHT BAR Grade Application:

• Utilized when higher than carbon steel mechanical properties are required

• Commonly used for axles, drive shafts, crankshaft connecting rods, high tensile bolts, studs, propeller shaft joints, rifle barrels, and induction hardened pins

• Bolt specification: 9.8 (in condition “T”)

• Bolt specification: 10.9 (in condition “U”)

• Gears

• Pinions

• Shafts

• Spindles

• Oil & Gas Industries

 

EN19 – BRIGHT BAR Equivalent grades:

Internal Standard	BS	Din	IS	EN	Sae/Aisi
EN19	709M40	42CrMo2	40Cr4Mo3	En19	4140

 

Addition to other grades:

MS, EN1A, EN3B, EN8, EN8D, EN9, EN24, EN31, EN32B, EN36C, EN41B, EN43B, EN47, EN353, IS2062, 42Crmo4, HCHCR, D2, D3, H-11, H-13, CW-1, OHNS M2, M35, M42, DIN-1.2714, P20, P20+S, P20+Ni, SCM420, ASTMSA-36, ASTM SA-105 , SAE1018, SAE1010, SAE4140, SAE8620, 16MNCR5, 20MNCR5, C20, C45, C50, C60, CK45, 20C8, 40C8, 45C8, 55C8, C55MN75, SAE52100, S40C, S355J2G3.

 

Our Supply Range: 

 

Price List: 

 

 

EN19 – BRIGHT BAR Chemical Composition: 

The following table shows the chemical composition of EN19 steel:

Element	C	Si	Mn	P	S	Cr	Mo	Fe
Content (%)	0.35-0.45	0.15-0.30	0.50 – 0.80	0.035	0.040	0.90-1.50	0.20-0.40	96.78-97.77

 

 

EN19 – BRIGHT BAR Mechanical Properties:

Properties	Metric	Imperial
Tensile strength	655 MPa	95000 psi
Yield strength	415 MPa	60200 psi
Bulk modulus (typical for steel)	140 GPa	20300 ksi
Shear modulus (typical for steel)	80 GPa	11600 ksi
Elastic modulus	190-210 GPa	27557-30458 ksi
Poisson’s ratio	0.27-0.30	0.27-0.30
Elongation at break (in 50 mm)	25.70%	25.70%
Hardness, Brinell	197	197
Hardness, Knoop (converted from Brinell hardness)	219	219
Hardness, Rockwell B (converted from Brinell hardness)	92	92
Hardness, Rockwell C (converted from Brinell hardness. Value below normal HRC range, for comparison purposes only)	13	13
Hardness, Vickers (converted from Brinell hardness)	207	207
Machinability (based on AISI 1212 as 100 machinability)	65	65

 

EN19 – BRIGHT BAR Hardness: 

Properties	Metric	Imperial
Hardness, Brinell	197	197

 

EN19 – BRIGHT BAR Heat treatment: 

Steel is heated at 845°C followed by quenching in oil. Before hardening, it can be normalized by heating at 913°C for a long period of time followed by air cooling.

 

EN19 – BRIGHT BAR Hardening:

Oil quench from a temperature of 85°C/88°C Celsius.

 

EN19 – BRIGHT BAR Tempering:

En19 alloy steel can be tempered at 205 to 649°C depending upon the desired hardness level. The hardness of the steel can be increased if it has lower tempering temperature. For example, tensile strength of 225 ksi can be achieved by tempering at 316°C (600°F), and a tensile strength of 130 ksi can be achieved by tempering at 538°C(1000°F).

 

EN19 – BRIGHT BAR Physical Properties:

DENSITY (G/CM 3)	8.08
DENSITY (LB/IN 3)	0.292
MELTING POINT (°C)	1425
MELTING POINT (°F)	2600

 

EN19 – BRIGHT BAR Thermal Properties: 

 

Average Coefficient of Linear Thermal Expansion (μm/m.K)
Temp. Range °C	20-100	20-200	20-400	20-600
Coefficient	12.2	12.6	13.7	14.6
Electrical Resistivity (  μΩ.m) and Thermal Conductivity (W/m.K)
Temp. Range °C	100	200	400	600
Electrical Resistivity	0.263	0.326	0.4575	0.646
Thermal Conductivity	42.6	42.2	37.7	33.0

 

 

EN19 – BRIGHT BAR Forging Properties:

Forge within the temperature range of 125°C/90°C Celsius.

 

EN19 – BRIGHT BAR Stress Reliving: 

Annealed: 600-650°c Heat in needed.

Hardened: 500-550°c Heat in needed.

 

EN19 – BRIGHT BAR Normalizing: 

Heat 870°C – 900°C and cool in still air.

 

EN19 – BRIGHT BAR Annealing: 

Anneal at a temperature of 85°C Celsius and cool steadily.

 

EN19 – BRIGHT BAR Density: 

Density of EN19 Alloy steel material: 7.85kg/cm3

 

EN19 – BRIGHT BAR Machinability: 

EN19 alloy steel has good machinability in the annealed condition.

 

EN19 – BRIGHT BAR Welding: 

EN19 steel can be welded using all conventional techniques. However, the mechanical properties of this steel will be affected if it is welded in the heat treated condition, and post weld heat treatment should be performed.

 

Supply Cities: 

Ahmedabad, Amaravathi, Ambattur, Bangalore, Belgaum, Chennai, Chittoor, Coimbatore, Dindigul, Mysore, Nellore, Hyderabad, Kochi, Mangalore, Tirupur, Tuticorin, Madurai, Andhra Pradesh, Karnataka, Puducherry, Kerala, Tamil Nadu, Telangana, Salem, Thanjavur, Trichy, Erode, Vellore, Ranipet, Sivakasi, Karur, Hosur, Nagercoil, Kanchipuram, Karaikudi, Neyveli, Cuddalore, Kumbakonam, Thiruvannamalai, Pollachi, Rajapalayam, Gudiyatham, Pudukottai, Vaniyambadi, Ambur, Nagapattinam, Trivandrum, Vijayawada, Guntur, Thirupathi, Nazarathpet, Kakinada, Kurnool, Kadapa, Nizamabad, Mahabubnagar, Karimnagar.

 

People also search as:

EN19 Bright Bars, EN19 Bright Bar Manufacturers, EN19  Bright Bar Suppliers, EN19 Bright Bar Stockist, EN19 Bright Bar Dealers, EN19 Bright Bar Distributors, EN19 Bright Bar Wholesalers, EN19 Bright  Bar Steel Traders, EN19 Steel Bright Bar Hexagon Distributors, EN19 Steel Bright Round  Bar, EN19 Steel Bright Bar Companies Near me.

 

EN19, EN19 Bright Bar Steel, EN19 Bright Bar Chemical composition, EN19 Bright Bar Mechanical properties, EN19 Bright Bar Equivalent Grades, EN19 Bright Bar manufactures, EN19 Bright Bar suppliers, EN19 Bright Bar dealers, EN19 Bright Bar stockiest, EN19 Bright Bar distributors, EN19 Bright Bar wholesalers, EN19 Bright Bar Traders.