42CRMO4
 
42CRMO4 Grade Introduction:
We are 42CrMo4 Round Bar manufacturers and manufacture a vast range of sizes and use only from prime quality billets and blooms as raw material. The range of products of 42CrMo4 Round Bar which we offer to our customers are of high quality and these round bars are used for making machinery and OEM Auto components. These products have been made keeping in mind the quality parameters that have been set by the industry in the market. 42CrMo4 Steel Round Bars are always supplied with the test certificates and can be supplied in bulk quantity as well as retail quantity as per customers’ requirements. 42CrMo4 round bars are supplied by us to various engineering and forging industries.
 
42CrMo4 Alloy Steel – SAE-AISI 4140 is classified as low alloy steel. Medium carbon steels are high-strength steels that include EN19 as an important member in the low alloy category. These steels show a positive response to a variety of heat treatments. 42CrMo4 is a 1% chromium – molybdenum medium hardenability general purpose high tensile steel – generally supplied hardened and tempered in the tensile range of 850 –1000 Mpa (condition T). 42CrMo4 Alloy steel is a high quality, high tensile alloy steel usually supplied readily machinable in ' T' condition, giving good ductility and shock resisting properties combined with resistance to wear. We specialize in the supply of EN19, 4140, 42CrMo4 Hot Rolled Steel Round Bars.
 
42CRMO4 Grade Application:
42CrMo4 alloy steel is widely used for engineering steel purpose, such as: making various kinds of machinery, automobile, mining spare part, the gearwheel of the engine, the driving gear of supercharger, the connecting rob, the pin chock under the high pressure, parts for power train applications, cold formed fastener components, shafts, gears, drill collars for the oil exploration, etc.
 
42CRMO4 Equivalent grades:
AISI 4140, SAE 4140, 42CrMo4, 42CrMoS4, Din 1.7225
 
 Addition to other grades:
MS, EN1A, EN3B, EN8, EN8D, EN9, EN24, EN31, EN32B, EN36C, EN41B, EN43B, EN47, EN353, IS2062, 42Crmo4, HCHCR, D2, D3, H-11, H-13, CW-1, OHNS M2, M35, M42, DIN-1.2714, P20, P20+S, P20+Ni, SCM420, ASTMSA-36, ASTM SA-105 , SAE1018, SAE1010, SAE4140, SAE8620, 16MNCR5, 20MNCR5, C20, C45, C50, C60, CK45, 20C8, 40C8, 45C8, 55C8, C55MN75, SAE52100, S40C, S355J2G3.
 
Our Supply Range:
 
Price List:
42CRMO4
 
 
42CRMO4 Chemical composition:
The following table shows the chemical composition of 42CRMo4 steel:
Element
C
Si
Mn
P
S
Cr
Mo
Content(%)
0.38-0.45
0.40 max
0.60-0.90
0.035 max
0.035 max
0.90-1.20
0.15-0.30
 
42CRMO4 Mechanical Properties:
Size Ø mm
Yield stress
Rp0.2,N/nn2, min
Ultimate tensile Stress,
Rm,N/nn2
Elongation
A5,%, min
Hardness HB
Toughness
KV, Joule, min.
<40
750
1000-1200
11
295-355
35 at 20 °C
40-95
650
900-1100
12
265-325
    35 at 20 °C
>95
550
800-950
13
235-295
    35 at 20 °C
 
42CRMO4 Hardness:
295 – 355
 
42CRMO4 Heat treatment:
42CrMo4 is alloy steel for quenching and tempering, which has a good combination of strength and toughness in the quenched and tempered condition. After the oil quenching, the steel will be hardened up to ø60 mm bar diameter. The microstructure of larger dimensions is not a fully martensite.
 
42CRMO4 Hardening:
First quenching heated slowly to 880°C, Then after adequate soaking at this temperature quench in oil or water. Temper as soon as tools reach room temperature. Second quenching heat to 780-820°C, then quenching in oil or water.
 
42CRMO4 Tempering:
Heat to 205-649°C, then cools in water or oil. normal delivery hardness 18-22 HRC.
 
42CRMO4 Physical Properties:
Quantity
Value
Unit
Thermal expansion
10 – 10
e-6/K
Thermal conductivity
25 – 25
W/m.K
Specific heat
460 – 460
J/kg.K
Melting temperature
1450 – 1450
°C
Density
7700 – 7700
kg/m3
Resistivity
0.55 – 0.55
Ohm.mm2/m
 
42CRMO4 Thermal Properties:
Thermal conductivity: 0,42 kW/(cm*K)
 
42CRMO4 Forging Properties:
42CrMo4 is forged at 926 to 1205°C.
 
42CRMO4 Stress Relieving:
450-650°C
 
42CRMO4 Normalizing:
840-880 °C
 
42CRMO4 Annealing:
  • Heat steel 42CrMo4 forged steel slowly and thoroughly to 800-850°C;
  • Cool slowly in the furnace to the temperature 480°C;
  • Complete annealing the steel in the air.
 
42CRMO4 Density:
7.85kg/m3 Tensile strength: 655 MPA
 
42CRMO4 Machinability:
42CrMo4 alloy steel has good machinability in the annealed condition.
 
42CRMO4 Welding:
Engineering steel 42CrMo4 has only limited weldability. Preheating to 200-300°C is strongly recommended; the upper limit should not be exceeded because of the risk for deterioration of the chrome layer. Alloy steel 42CrMo4 can be friction welded. However, precautions are necessary so as to limit the formation of undesirable microstructures in the welded zone.
 
Supply Cities:
Ahmedabad, Amaravathi, Ambattur, Bangalore, Belgaum, Chennai, Chittoor, Coimbatore, Dindigul, Mysore, Nellore, Hyderabad, Kochi, Mangalore, Tirupur, Tuticorin, Madurai, Andhra Pradesh, Karnataka, Puducherry, Kerala, Tamil Nadu, Telangana, Salem, Thanjavur, Trichy, Erode, Vellore, Ranipet, Sivakasi, Karur, Hosur, Nagercoil, Kanchipuram, Karaikudi, Neyveli, Cuddalore, Kumbakonam, Thiruvannamalai, Pollachi, Rajapalayam, Gudiyatham, Pudukottai, Vaniyambadi, Ambur, Nagapattinam, Trivandrum, Vijayawada, Guntur, Thirupathi, Nazarathpet, Kakinada, Kurnool, Kadapa, Nizamabad, Mahabubnagar, Karimnagar.

 

People also search as:
42CrMo4 Steel Round Bar, 42CrMo4 Steel Round Bar Manufacturers, 42CrMo4 Steel Suppliers, 42CrMo4 Stockist, 42CrMo4 Steel Dealers, 42CrMo4 Steel Distributors, 42CrMo4 Wholesalers, 42CrMo4 Steel Traders, 42CrMo4 Steel Square Distributors, 42CrMo4 Steel Flat Bar, 42CrMo4 Steel Companies Near me.
 
42CrMo4, 42CrMo4 Steel, 42CrMo4 Chemical composition, 42CrMo4 Mechanical properties, 42CrMo4 Equivalent Grades, 42CrMo4 Steel plate, 42CrMo4 Steel sheet, 42CrMo4 Manufacturers, 42CrMo4 Suppliers, 42CrMo4 Dealers, 42CrMo4 Stockist, 42CrMo4 Distributors, 42CrMo4 Wholesalers, 42CrMo4 Traders.
 

Metal Weight Calculator:
Shape:
Quantity:
Diameter:
Length:
Results
Calulated Weight: 0 Kgs / 0 Lbs